Blog
Dostkimya
Carbon Fiber Products -
Structural Reinforcement -
Construction Chemicals -
Composite Materials -

Composite Materials

Composite Materials

Admixtures for Construction

Admixtures for Construction

News / Announcements

Carbon Fiber Roller Production 2020-02-01

We can produce Carbon Fiber Rollers in any size you want. The other parts, except the bearing parts, are completely carbon fiber. They have many advantages over conventional steel or aluminum rollers. Its high strength compared to its low weight brings with it advantages such as less vibration, longer bearing life, fewer failures and maintenance costs. Higher roller speeds will be possible when Carbon Fiber Rollers and Carbon fiber rollers replace traditional steel or aluminum rollers, and higher line speeds will be achieved to make production more efficient. With carbon fiber cylinders, breaks will be reduced, less starting waste will be generated and material wraps in breaks will be reduced thanks to better tension control on the machines. These improvements in shaft and roller performance directly affect productivity and increase machine efficiency. Advantages of Carbon Fiber Roller Advantages of light weight, Less bearing wear Longer bearing life Easier and safer use Advantages of High Rigidity, Less coffee Less web wrinkling. Longer bearing life. Faster line speed with less vibration (Higher critical speed). More efficiency and better product quality. Less mesh creases at wider apertures Advantages of Low Moment of Inertia, The rollers rotate at line speed Less network scratches Reduction in cylinder wear Destroys static electricity Responds faster to changes in the line Fewer web breaks Less startup waste Less web wrapping in a web copy Prolongation of cylinder life and reduced coating thickness. More accurate transducer measurements More precise tension control Fewer platen tabs Higher quality wrapped rolls with less air drag You can contact us to produce carbon fiber rollers with different sizes.

Resins For Composite Production 2019-03-06

Epoxy resin systems are the two-component (resin + hardener) systems most commonly used in advanced composite parts manufacturing. As a result of laminations with carbon, aramid and glass fiber reinforcements, very high performance composite products can be obtained. MGS Laminating Epoxy Resin L160 System Specifications The MGS L160 Epoxy Resin system is certified by German Federal Aviation. It is highly compatible with carbon, glass aramid fiber fabrics It has very good mechanical and thermal properties It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.) Density, 1.13-1.17 g/cm3 Vizcosite, 700-900 MPas It can be stored for 24 months in unopened packaging. MGS Lamination Epoxy Resin L135 System Specifications He has German Loyd Certificate It is highly compatible with carbon, glass aramid fiber fabrics Wind tribune repairs are a product that has become a standard in wood and fiber laminations. It has very good mechanical and thermal properties It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.) Density, 1.1-1.23g/cm3 Vizcosite, 1000-1500 MPas It can be stored for 24 months in unopened packaging. Specifications of MGS Infusion Epoxy Set RIM135/RIMH135: Product:  MGS RIMR135/ MGS RIMH137 Running Time:  150 Min. The Mixing Ratio By Weight:  100/30 Volumetric:  100/35 Application Temperature:  10°C - 50°C Packing Set:  ; 1.25kg Set, 6.25kg Set, 31.25kg Set MGS Lamination Epoxy Resin L285 System Specifications MGS L285 Epoxy Resin system German Federal Aviation Authority he has a certificate. It is highly compatible with carbon, glass aramid fiber fabrics It has very good mechanical and thermal properties It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.) Density, 1.18-1.23 g/cm3 Vizcosite, 600-900 MPas It can be stored for 24 months in unopened packaging. MGS Lamination Epoxy Resin L326 System Specifications It is highly compatible with carbon, glass aramid fiber fabrics It has very good mechanical and thermal properties it has a working time of up to 5 hours Density, 1.14-1.19 g/cm3 Vizcosite, 5000-7000 MPas It can be stored for 24 months in unopened packaging.

Carbon Fiber Plate Products 2019-02-11

Pro Carbon Fiber Plate (Sheet)  product is produced by pressing 100% carbon fiber epoxy prepreg under high temperature and pressure with dimensions of thickness. Thanks to the high-quality carbon fiber prepreg used in its production, high-performance, double-sided are also smooth, uniform plates. They are decorative and structural engineering plates designed to meet the most rigorous standards of any carbon fiber board. 1mm 500mm x 500mm Pro Carbon Fiber Plate Usage Areas General Engineering Robotic Applications Aerospace aviation Motorsport X-Ray- Metrology Equipment R-C Models Pro Carbon Fiber Plate Sales If you want to buy A-grade engineering grade carbon fiber sheet plates in series, please contact us. We can find solutions to your special needs together. We can determine the most suitable carbon fiber plate for you together with our existing carbon fiber plate samples Our production facilities are suitable for the production of prepreg carbon fiber or hybrid composite plate according to any specification, usually with little or no installation cost. You can choose special thickness and special fiber you can take advantage of our competitive prices. How to Produce, Cut and Shape Pro Carbon Fiber Plate 100% carbon fiber epoxy prepregs are pressed under high pressure, controlled curing at high temperatures and production takes place. We always offer high quality carbon fiber plates thanks to the superior quality raw materials used and the precise manufacturing techniques. For simple cuts, you can use a pickling or a hacksaw. If you send your data in DWG format, we also process your carbon fiber plate by CNC. You can take advantage of this service at very affordable prices and very quickly.

Blog Articles


Have you visited our blog where we share our articles about our company and especially the sector? For much more, we recommend you to visit our blog page.

WRITE TO US
COMPOSITE MATERIALS ONLINE SALES www.kompozit.net