TDS Technical Document Sheet   

14mm-12mm Glass Fiber Tube Outer Diameter:14mm, Inner Diameter:12mm, Wall Thickness: 1mm

Our products are high performance glass fiber Tube manufactured from thermoset resin by pull-wrap method with high measurement accuracy. when producing 14mm-12mm Glass Fiber Pipe, +37/-37 and 89 degree windings were made on 0 degree glass fiber fibers. The winding fibers it has provide strength in other directions besides longitudinal strength. it has the advantage that the fiber ratio in the direction of 0 degrees is more, it is more rigid than other pipes of the same diameter.

14mm-12mm Glass Fiber Tube Dimensions
Outer diameter, 14mm
Inner diameter, 12mm
Wall thickness, 1mm in half diameter
Weight 89gr/Meter
Tolerance 0.1mm
Height, standard 2000mm (orders are completed with 1 meter if the neck is selected 2 meters and the order is not selected in the form of multiples of 2 meters.

click here for our other sizes of glass fiber tubes!

Advantages of 14mm-12mm Glass Fiber Tube
These wonderful carbon fiber pro Tubes are very light
Easy and fast to apply,
No risk of corrosion,
Grinding and polishing can be performed on
In addition to being an alternative to aluminum or steel tubes, they can carry more loads with the same thicknesses as them.

14mm-12mm Glass Fiber Tube Places of Use
Glass fiber pro pipes can be easily used in robotics/automation, R/C models, UAVs, entertainment equipment, motor sports and your own special designs where light weight is important

How to Cut 14mm-12mm Glass Fiber Tube
It can be easily cut with a fine-tipped hair saw and profile cutting tools. The edges can be leveled with wet or dry sandpaper You can make your job even easier by gluing paper tape to the part you are going to cut beforehand.