Blog
Dostkimya
News / Announcements

Karbon Fiber Güçlendirme Ürünleri

News Details

They are strips obtained by the method of laminating carbon or aramid fiber in one direction with epoxy recine.

Application Areas:
In the strengthening of tunnels, silos and bridges
In the strengthening of all kinds of factories, residential buildings
In the strengthening of historical monuments
All kinds of industrial plant retrofits

Advantages:
It is very light,
Easy and fast to apply,
It has a very high strength,
There is no risk of corrosion
Different elastiste module options are available
2018-09-03

News / Announcements

Carbon Fiber Roller Production 2020-02-01

We can produce Carbon Fiber Rollers in any size you want. The other parts, except the bearing parts, are completely carbon fiber. They have many advantages over conventional steel or aluminum rollers. Its high strength compared to its low weight brings with it advantages such as less vibration, longer bearing life, fewer failures and maintenance costs.

Higher roller speeds will be possible when Carbon Fiber Rollers and Carbon fiber rollers replace traditional steel or aluminum rollers, and higher line speeds will be achieved to make production more efficient. With carbon fiber cylinders, breaks will be reduced, less starting waste will be generated and material wraps in breaks will be reduced thanks to better tension control on the machines. These improvements in shaft and roller performance directly affect productivity and increase machine efficiency.

Advantages of Carbon Fiber Roller
Advantages of light weight,
Less bearing wear
Longer bearing life
Easier and safer use
Advantages of High Rigidity,
Less coffee
Less web wrinkling.
Longer bearing life.
Faster line speed with less vibration (Higher critical speed).
More efficiency and better product quality.
Less mesh creases at wider apertures
Advantages of Low Moment of Inertia,
The rollers rotate at line speed
Less network scratches
Reduction in cylinder wear
Destroys static electricity
Responds faster to changes in the line
Fewer web breaks
Less startup waste
Less web wrapping in a web copy
Prolongation of cylinder life and reduced coating thickness.
More accurate transducer measurements
More precise tension control
Fewer platen tabs
Higher quality wrapped rolls with less air drag


You can contact us to produce carbon fiber rollers with different sizes.

Resins For Composite Production 2019-03-06

Epoxy resin systems are the two-component (resin + hardener) systems most commonly used in advanced composite parts manufacturing.
As a result of laminations with carbon, aramid and glass fiber reinforcements, very high performance composite products can be obtained.

MGS Laminating Epoxy Resin L160 System Specifications
The MGS L160 Epoxy Resin system is certified by German Federal Aviation.
It is highly compatible with carbon, glass aramid fiber fabrics
It has very good mechanical and thermal properties
It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.)
Density, 1.13-1.17 g/cm3
Vizcosite, 700-900 MPas
It can be stored for 24 months in unopened packaging.

MGS Lamination Epoxy Resin L135 System Specifications
He has German Loyd Certificate
It is highly compatible with carbon, glass aramid fiber fabrics
Wind tribune repairs are a product that has become a standard in wood and fiber laminations.
It has very good mechanical and thermal properties
It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.)
Density, 1.1-1.23g/cm3
Vizcosite, 1000-1500 MPas
It can be stored for 24 months in unopened packaging.

Specifications of MGS Infusion Epoxy Set RIM135/RIMH135:
Product: MGS RIMR135/ MGS RIMH137
Running Time: 150 Min.
The Mixing Ratio
By Weight: 100/30
Volumetric: 100/35
Application Temperature: 10°C - 50°C
Packing Set: ; 1.25kg Set, 6.25kg Set, 31.25kg Set

MGS Lamination Epoxy Resin L285 System Specifications
MGS L285 Epoxy Resin system German Federal Aviation Authority
he has a certificate.
It is highly compatible with carbon, glass aramid fiber fabrics
It has very good mechanical and thermal properties
It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.)
Density, 1.18-1.23 g/cm3
Vizcosite, 600-900 MPas
It can be stored for 24 months in unopened packaging.

MGS Lamination Epoxy Resin L326 System Specifications
It is highly compatible with carbon, glass aramid fiber fabrics
It has very good mechanical and thermal properties
it has a working time of up to 5 hours
Density, 1.14-1.19 g/cm3
Vizcosite, 5000-7000 MPas
It can be stored for 24 months in unopened packaging.

Carbon Fiber Plate Products 2019-02-11

Pro Carbon Fiber Plate (Sheet) product is produced by pressing 100% carbon fiber epoxy prepreg under high temperature and pressure with dimensions of thickness. Thanks to the high-quality carbon fiber prepreg used in its production, high-performance, double-sided are also smooth, uniform plates. They are decorative and structural engineering plates designed to meet the most rigorous standards of any carbon fiber board.

1mm 500mm x 500mm Pro Carbon Fiber Plate Usage Areas
General Engineering
Robotic Applications
Aerospace aviation
Motorsport
X-Ray- Metrology Equipment
R-C Models

Pro Carbon Fiber Plate Sales
If you want to buy A-grade engineering grade carbon fiber sheet plates in series, please contact us. We can find solutions to your special needs together. We can determine the most suitable carbon fiber plate for you together with our existing carbon fiber plate samples Our production facilities are suitable for the production of prepreg carbon fiber or hybrid composite plate according to any specification, usually with little or no installation cost. You can choose special thickness and special fiber you can take advantage of our competitive prices.

How to Produce, Cut and Shape Pro Carbon Fiber Plate
100% carbon fiber epoxy prepregs are pressed under high pressure, controlled curing at high temperatures and production takes place. We always offer high quality carbon fiber plates thanks to the superior quality raw materials used and the precise manufacturing techniques. For simple cuts, you can use a pickling or a hacksaw. If you send your data in DWG format, we also process your carbon fiber plate by CNC. You can take advantage of this service at very affordable prices and very quickly.

Our Carbon Fiber Hose Sale 2018-12-12

A Carbon Fiber Hose is a form of carbon fiber rope knitted in the form of a hose. It can expand in a certain December range. Carbon Fiber Hose In this form can be considered as an open-ended sock and provides convenience in application. You can easily use it in pipes, model airplanes, sports equipment and special designs where it is desired to increase the buckling strength of various diameters. In addition, it is used together with our acrylic resins in the link for orthotic prosthesis applications.

Technical Characteristics of Carbon Fiber Hose
Compatible with epoxy, acrylic, polyester and vinylester resins
Weaving type, Knitting
Weight, 200gr/m2

Click here to access our epoxy systems that you can choose according to your production method together with Carbon Fiber hose!

Carbon Fiber Hose Shipping Method
When you buy Carbon Fiber hose up to the desired meter quantity, it is packaged and shipped in rolls.

Production Of Carbon Fiber Rollers 2018-10-16

Carbon Fiber Roller Idler Roller Roller Manufacture Air Shaft Carbon Fiber Roller for converting paper,film, foil, etc. for demanding applications in industries, rolls with carbon fiber bodies, idler rolls, shafts bring many advantages. These high-tech carbon fiber products are also available with the following key features

General characteristics of carbon fiber rollers
Super light
High Corrosion resistance
High Specific rigidity
Low Moment of Inertia
Thermal stability
Vibration damping feature
Electrically conductive
They have many advantages over conventional steel or aluminum rollers.Its high strength compared to its low weight brings advantages such as less vibration, longer bearing life, fewer breakdowns and maintenance costs

When carbon fiber rollers replace traditional steel or aluminum rollers, higher roller speeds will be possible and higher line speeds will be achieved to make production more efficient. With carbon fiber cylinders, breaks will be reduced, less starting waste will be generated and material wraps in breaks will be reduced thanks to better tension control on machines. These improvements in shaft and roller performance directly affect productivity and increase machine efficiency.

Advantages of carbon fiber rollers
Advantages of light weight
Less bearing wear
Longer bearing life.
Easier and more secure to use.
Advantages of High Rigidity
Less coffee
Less web wrinkling.
Longer bearing life.
Faster line speed (Higher critical speed) with less vibration.
More efficiency and better product quality.
Less mesh creases at wider openings.
Advantages of Low Moment of Inertia
The rollers rotate at line speed
Less network scratches.
Reduction in cylinder wear.
It destroys static electricity.
Responds faster to changes in the line
Fewer web breaks
Less startup waste.
Less web wrapping in a web copy
Prolongation of cylinder life and reduced coating thickness.
More accurate transducer measurements.
More precise tension control.
Fewer platen tabs
Higher quality wrapped rolls with less air drag

Our Carbon Fiber Box Profile Sale 2018-10-10

Carbon Fiber Pro Square Box Profile Production is carried out using high quality, very precise techniques using 100% carbon fiber- thermoset resin. Our high rigidity carbon fiber square profile PRO products have the appearance of a complete engineering material with its amazing strength as well as its wonderful color. The square profile is 1meter or 2meter (1000mm/2000) long. This high strength Pro carbon fiber square profile is very useful for applications where light weight and strength are important, such as machine parts, R/C models, UAVs and robotics. For more different products, you can review our products in the links below.

Carbon Fiber Pro Square Box Profile

Carbon Fiber Pro Square Box Profile View
30mm/27mm Carbon fiber square profile has the appearance of carbon fiber with helical winding on black UD matte color. For maximum strength, the layers are manufactured in both 0° and +- 37° directions, these pultrusion tubes do not have extra windings,creating a wonderful decorative image. With these features, when using our carbon fiber square profile PRO product, you will both use it for your demanding mechanical applications and have a great carbon fiber engineering material appearance.

Carbon Fiber Pro Square Box Profile Performance
Especially in applications where rigidity is important, you get the weight / tensile strength ratio while you get support against cutting loads thanks to the winding it has. **mm/**our mm PRO Carbon Fiber tubes are square profiles with performance suitable for demanding engineering applications, including robotics/automation, R/C models, UAVs, entertainment equipment, motor sports.

How to Cut Carbon Fiber Pro Square Box Profile
This Pro carbon fiber square profile is cut with an iron hacksaw and its edges can be leveled with wet or dry sandpaper. This process is easy enough to do with simple workshop tools. Cutting a carbon fiber tube and performing edge leveling is not a difficult process if you follow some basic safety precautions. You can make your job even easier by gluing paper tape to the part you are going to cut in advance.

Sale Of Cropped Basalt Fiber 2018-07-12

STAPLE BASALT FIBER

PRODUCT DATA SHEET

Basalt ‘chopped’ fiber is continuous filament cut to predetermined lengths to suit a particular application.

They are usually coated with a sizing/binder to make them compatible with other materials and elements with which it has to coexist the primary end product (concrete mix, for instance).

The ability of the basalt fiber to accept sizing is good. This is known as ‘wetout’.

High tensile strength
Alkali resistant
High thermal conductivity
No carcinogenic risk or other health hazards
Completely inert with no environmental risks
Resistant to acids and aggressive chemicals
High E modulus resulting in excellent specific tenacity, three times that of steel fiber
Good fatigue resistance
Electro-magnetic resistant

Typical uses for chopped fiber strands:

Basalt is the best reinforcement for concrete due to its tensile strength and natural resistance to deterioration from alkali
Reinforcement for composites, polyester/epoxy resins and plastics as used
in automotive body panels, boat hulls and pultruded products, etc.
Friction materials such as brake pads and linings
Manufacture of basalt mat/felt
High-temperature insulation applications
Passive fire protection materials
Filler for gypsum and sheetrock board requiring increased ‘burn-thru’ capability,
to meet building regulations
High-performance automotive muffler filler

Technical Data

Thermal limits of application: -260°C/-436°F to +982°C/1800°F
Vitrification temperature: 1050°C/1922°F
Melting temperature: 1450°C/2642°F
Density: 2600/2800 kg/m3
Filament diameter: 9 to 23 microns (depending on end use)

Carbon Fiber Tubes 2012-06-02

18mm-16mm Carbon Fiber Pro Pipe Our products are high performance carbon fiber pipe manufactured from thermoset resin by pull-wrap method with high measurement accuracy. +37/-37 and 89 degree windings were made on 0 degree carbon fiber fibers. Unlike carbon fiber eco pipes, the winding fibers it has provide strength in other directions besides longitudinal strength. 18mm/16mm carbon fiber pro pipes have the advantage of having a higher fiber ratio in the direction of 0 degrees and being more rigid than 3k carbon fiber pipes of the same diameter. The carbon fiber pro pipe we sell on this page has dimensions of outer diameter: 18mm, inner diameter: 16mm, wall thickness: 1mm in half diameter and length: 1 meter (1000mm/39”) in length. This special carbon fiber pipe is an ideal choice for small or large-scale applications where light weight and strength are important, such as special type kites, R/C models, UAVs and robotic applications. For smaller diameter products, you can check out our products at the links below.

Click here to access Carbon Fiber 3k Pipe products.
Click here to access the Carbon Fiber Pipe Eco products.

These wonderful carbon fiber pro pipes are very light, easy and quick to apply, no risk of corrosion. Grinding and polishing operations can be performed on it. In addition to being an alternative to aluminum or steel tubes, they can carry more loads with the same thicknesses as them. Or you can make a tube of the same thickness lighter and stronger with carbon fiber.

18mm-16mm Carbon Fiber Pro Pipe Fittings
Carbon fiber pro pipes are widely used in robotic applications, R/C models, drone and UAV applications, kite, motorsport, marine, etc. you can easily use it in all your applications where other lightness and strength are required.

How to Cut 18mm-16mm Carbon Fiber Pro Pipe
It can be easily cut with a fine-tipped hair saw and profile cutting tools. The edges can be leveled with wet or dry sandpaper You can make your job even easier by gluing paper tape to the part you are going to cut beforehand.

Order Note: You can choose 1 meter or 2 meter size from this product. Orders are completed with 1 meter if the neck is selected 2 meters and the order is not selected in the form of multiples of 2 meters. (you need to add 2 pieces from 1 meter to the basket to be sent at 2 meters tall.)

Outer Diameter(OD), 18mm
Inner Diameter(ID), 16mm
Wall Thickness, 1mm
Length, 1000mm or 2000mm
Weight, 85.5 g/meter
Tolerance, 0.1mm

Click here to find other Carbon Fiber Pipe Pro products.

Blog Articles

Dostkimya.com/blog

Have you visited our blog where we share our articles about our company and especially the sector? For much more, we recommend you to visit our blog page.

Dostlog WRITE TO US
COMPOSITE MATERIALS ONLINE SALES www.kompozit.net