Araldite 2014-2 50ml high temperature and chemical resistant adhesive
It is an ideal choice for bonding composite materials made of carbon fiber and glass fiber, as well as for bonding many materials to these products.
Araldite 2014-2 50ml is a multi-purpose, two-component, high-strength thixotropic adhesive that is cured at room temperature. it has the ability to fill non-flowing gaps up to 5 mm thick. It has high corrosion resistance.

Araldite 2014-2 50ml Areas of Use
Composites made of carbon and glass fiber. It is suitable for gluing a wide variety of metals, ceramics, glass, rubber, hard plastics and many other materials.
It is a versatile adhesive for industrial application.

Araldite 2014-2 50ml Application Instructions
The strength and durability of an glued joint depends on the proper processing of the surfaces to be glued.
At least the joint surfaces should be cleaned with a good degreaser such as acetone, iso-propanol (plastics to remove all oil, grease and dirt residues) or other proprietary degreasing agents.
Low-grade alcohol, gasoline (gasoline) or thinner should never be used.
The strongest and most durable joints are obtained by mechanical etching or chemical etching ("pickling").
Degreased surfaces. After etching, a second degreasing operation should be performed.

Application of Araldite 2014-2 50ml Adhesive
It can be applied easily and quickly. It is used together with the Araldite 2000 50ml Application Gun.
Araldite 2014-2 a spare end with a mixer is installed on the end of the 50ml cartridge,
Araldite 2000 is applied to the surface by squeezing with a 50ml Application Gun.
There is a mixing tip next to each cartridge. Click here to order an extra mixed spare tip.

Technical Characteristics of Araldite 2014-2 50ml
50ml cartridge is in the package
Working time, 60 minutes (100gr/23C)
Curing time, 180 minutes
Color, Grey
Gap filling, 5mm

Araldite 2000 series adhesives are structural adhesives specially developed to meet demanding engineering requirements. Our range of Araldite 2000 structural adhesives includes epoxy, polyurethane and methacrylate based adhesives, each of which has been selected for its superior performance in different applications. You can use this series when gluing carbon fiber, FRP / FRP, metal, wood, aluminum honeycomb, nomex honeycomb, some kinds of plastics and other materials.

Click here to access our other Araldite 2000 series adhesives!