TDS Technical Document Sheet   

Our Infusion and Lamination Type MGS Lamination Epoxy Resin L160 systems are products produced by Hexion, which are widely used in the world in advanced composite parts manufacturing, have proven themselves for many years and are used in aerospace, automotive, marine, aerospace, wind propellers and defense sectors. The MGSL160 system, which has an aviation certificate, can be easily used in infusion applications that are not too large. It is cured at room temperature and then parts that meet civil aviation standards can be obtained by the postcure process. ​

MGS Laminating Epoxy Resin L160 System Specifications
The MGS L160 Epoxy Resin system is certified by German Federal Aviation.
It is highly compatible with carbon, glass aramid fiber fabrics
It has very good mechanical and thermal properties
It has a working time of 30-45 minutes at room temperature (it may vary depending on the ambient temperature.)
Density, 1.13-1.17 g/cm3
Vizcosite, 700-900 MPas
It can be stored for 24 months in unopened packaging.

Hardeners that Can be Used with the MGS Lamination Epoxy Resin L160 System
The curing agent LH160 has a mixture ratio of: 100:25 +-2 g. It has a working time of 30-45 minutes (it may vary depending on the ambient temperature.)
The curing agent LH260S has a mixture ratio of: 100:36 +-2gr (when using this system, heat treatment of +80 °C is required) It has a working time of 45-60 minutes (it may vary depending on the ambient temperature).


A sufficient amount of hardener should be taken with it. Click here to access our epoxy hardeners!

MGS Lamination Epoxy Resin L160 System Operating Temperature
-60°C / +50°C without heat treatment
-60°C / +80°C By applying heat treatment


MGS Laminating Epoxy Resin L160 System Application Areas
Glider is a proven product that you can easily use in your motor glider, motor plane, boat, ship, sports equipment, model aircraft, mold and many general applications.